about the Voxx Replica Camaro ZL1-1LF

The Vöxx Replica Camaro ZL1-1LF features five split-spoke groups extending from the compact center section toward the outer edge of the wheel. Each spoke group incorporates a long cutout through its center, creating ten outer spoke sections while retaining five clearly defined primary groups.

The spokes reach close to the rim, giving the wheel a full-face appearance with only a narrow outer edge. Raised spoke surfaces and recessed channels add depth across the face, while the large openings between the spoke groups keep the design from looking crowded. A round center-cap area sits within the exposed five-lug layout, and the symmetrical spoke pattern maintains the same appearance on both sides of the vehicle.

Designed for select 2010 and newer Chevrolet Camaro applications, the ZL1-1LF is available in 20x9 with a +27mm offset and 20x10 with a +35mm offset. The 20x10 version is listed as a rear-only fitment. Both sizes use a 5x120 bolt pattern, a 67.1mm center bore, and a 1,675-pound load rating.

The two widths allow compatible Camaros to use either a square setup or a staggered combination with the 20x9 wheel at the front and the 20x10 wheel at the rear. The correct wheel position, tire size, brake clearance, and suspension clearance should be confirmed for the vehicle’s model year and trim before ordering.

The Camaro ZL1-1LF is offered exclusively in Gloss Black. The finish covers the spoke faces, recessed cutouts, center section, barrel, and outer edge in one consistent color. Reflections across the raised and recessed surfaces make the split-spoke construction easy to distinguish.